Page History: Installation
Compare Page Revisions
Page Revision: Thursday, 07 April 2011 14:58
Before installing PhoneBOX, you must think about which machine or machines will be your
Masters and which will be
Buddys. If you are running the NX in single-show mode, you need a single
Master machine. If you are running the NX in a dual-show mode, you will need two
Master machines, one for each show.
All other machines must be installed as
Buddys and these will connect to the relevant
Master in order to share information for that show. The
Master machine runs the database that stores past call information and the
Buddys get access to that information from the
Master. For this reason, the
Master machine needs to always be running PhoneBOX in order to allow the
Buddys to connect to it. Running the main Control Room / Studio machine as the
Master is the usual arrangement.
To illustrate the point, here are a couple of typical scenarios. Firstly, the diagram below shows a system running in single-show mode with a couple of call screeners.
And this diagram shows a system running in dual-show mode with a call screener for each show. More call screeners can be easily added by installing them as
Buddy machines and connecting them to the relevant
Master.
Once you have established your toplogy, run up the installer on the Master machine and follow the prompts. You will need to know the IP address of your NX and also its password if it has been changed from the default. This is the same password that is used in conjunction with the username
user to access the NX's web configuration.
Once PhoneBOX is installed on the Master machine, a license will need to be generated. It is strongly recommended that the machine is connected to the internet in order to make this process as straightforward as possible.
The license that is generated will allow you to run the lite version. If you have already paid for the upgrade to the full version, you will need to wait a short time for Broadcast Bionics to upgrade the license. Once this is done, the modified license will be picked up when you restart PhoneBOX (assuming that the machine has internet access).
Once the license has been generated, PhoneBOX will be functional on the
Master machine. The
Buddy machines will then need PhoneBOX installing on them and during this installation, you will need to enter the IP address or machine name of your
Master machine.